Usually large framed flexible modules are used for PV power station built as arrays, which can be designed as different linking patterns to support the load of different power.
|
Model |
SF-AF-64 |
SF-AF-32 |
SF-AF-11 |
SF-AF-5 |
|
Power Rating (W) |
64.0 |
32.0 |
10.0 |
5.0 |
|
Peak Voltage (V) |
16.5 |
16.5 |
16.5 |
16.5 |
|
Peak Current (A) |
3.9 |
1.9 |
0.6 |
0.3 |
|
Open Circuit Voltage (V) |
23.8 |
23.8 |
23.8 |
23.8 |
|
Short Circuit Current (A) |
4.8 |
2.4 |
0.8 |
0.4 |
|
Dimension (mm) |
1366*741 |
1366*383 |
491*383 |
491*206 |
|
Weight (kg) |
9.2kg |
4.8kg |
1.6kg |
1.1kg |
|
Cable length |
-- |
-- |
2438 |
2438 |
|
Warranty Period |
20 years |
20 years |
10 years |
10 years |
The tests of international standards were performed for the modules:
- Insulation test；
- Thermal cycling test;
- Humidity freeze test;
- Damp heat test;
- UV test;
- Wet leakage current test;
- Mechanical load test;
- Hail impact test;
- Robustness of terminations test.
These products are strictly designed and manufactured according to IEC61646.
In the first 8-10 weeks, the actual output will be higher than ratings. The output power may be 115% of the rating power, the operating voltage may exceed about 11%, and operating current may exceed 4%. All the specifications (± 5%) are on the standard test conditions ( Irradiance:AM1.5, 1000W / ㎡; Temperature: 25 ℃ ). If the temperature is too low or affected by spectral or other factors, the actual results may vary compared with the rated power up to 10%. The maximum open voltage of system shall not exceed 600 VDC. Technical parameters are subject to change without notice！
|
Product Instruction 
